The props on this website and in our book(s) have
not been tested for any safety standards or regulations. Although the props
are built with safety in mind, the end user of these designs should use extreme
caution when building as well as displaying most of the props described on this
site and in our books. The author of this site and our handbook assumes no responsibility
for personal or property damage as well as cannot be held responsible for the
loss of fingers, limbs, or bladder control from the use of these props.
Safety tips
1. When working with any type of power tools take the proper safety precautions
to protect yourself from any harm. Always wear gloves, safety glasses, dust
masks, and earplugs whenever using these types of tool.
2. When working with metal, use extra caution when removing metal burrs from
the cuts and holes as well as when you are handling sharp edges of unfinished
metal. Also metal will become very hot when you are grinding down the edges,
so I suggest wearing welding gloves or using vise grips when handling hot metal.
3. Use proper respirators whenever using any spray and especially when using
silicon spray and fiberglass resin. Although it may give you a buzz while working
with these substances, the hangover and loss of brain cells is not worth it.
4. When using pneumatics, always start with your air pressure low and your flow
controls open to a minimum then work up the pressure until you achieve the effect
you are looking for. Also always disconnect the air when working on or with
one of these props. You never know when the solenoid may fire and it's not going
to stop for your face or body parts. If you use common sense and protect yourself
from harmful tools and chemicals, there should be no reason that you can't have
a long and prosperous hobby of building props with all of your fingers.
BE SAFE
Full prop building instructions availiable in
the DC Prop Builders Handbook
Back to props